An-san Key Panther SX

The TR-2050 Panther SX model has all the features required in laser and ball key duplication as well as many extras. Enjoy the privilege of having these features developed by the Remkeys team …

The clamps that hold the key are what matters in a key machine. Equipped with MN-02055 coded vise, Panther SX model offers the user superior performance in duplicating graduated ball keys except for flat ball and pantograph tool keys. In addition to the different connection points on the vise, various surfaces in these sections allow you to connect many key groups without the need for an apparatus.

Keep up with the action, because the Panther SX knows what you are doing …

The Motion Sensitive Run feature offers both safe and economical use with the engine running only during the key cutting process. This feature also automatically turns on the lighting of the machine when you start working. When you start the adjustment process, even if you do not open the adjustment system, Panther understands this and starts the system automatically. Some users turn the switch without turning off the breaker to process the other side after the operation on one side of the switch is finished, and this causes unwanted accidents, and these accidents are prevented with the motion sensitive operation feature designed for safety rather than comfort. Energy saving is also provided since the machine does not work outside of use.

All handles on the machine such as hand-operated wrench clamping handles, cutting action lever, body lowering lever are ergonomically designed, this design provides ease of use while copying the key, as well as allowing the wrench attached to the vise to be tightened with the correct shape and power.

Electronic Control Unit is an electronic hardware developed by Ansan R&D team for products. With a smart processor on the electronic circuit board of the machine, the operation, lighting, movements and many other systems of the machine are controlled by this processor. Even if you are not aware of it, it is always ready for everything necessary for you in the background.

Low watt consumption, high and efficient power …

With the new engine technology developed, maximum power is obtained with the lowest consumption, and you can safely use your machine for many years with this new generation engine that is silent and does not require maintenance.

Considering nature in product development, the Ansan R & D team made your machine stand by with the lowest consumption when you are not using it. After you are finished working with the Panther SX, it warns you audibly and visually a minute later, if you do not continue the process, the machine goes into sleep mode at the end of this period.

Environmentally friendly and comfortable lighting with specially designed LED lighting focused on the right area, and you do not need to turn on the lighting because Panther automatically turns it on when it realizes that you need it.

You can take advantage of the Fix Feature fixing feature adapted to all axes in order to repeat the fixed axis movements continuously in key duplicating process and to eliminate the effort for this . With this feature, you can also minimize the fatigue that will get on your cutter by cutting in steps and keep the life of the cutting tool longer. For this, you just need to turn the hand buttons on the XYZ axes.

All axes are equipped with high quality linear bearings. There are twelve linear bearings on the machine, four on each axis. The system also has a lubrication and maintenance-free design, as well as ease of use and precise operation. In this way, Panther will continue to serve you stably for many years without the need for service.

Due to the short working life and maintenance periods of mechanical buttons, alternative control systems are needed today, the most used system of these is membrane buttons, which are designed to allow you to safely control your machine for years and are placed in an ergonomic position on the machine.

Since each set used in the copying of ball and laser type keys is different, the sets are changed and the process is carried out. Since the dimensions of these tools are different from each other, a calibration is required to introduce these tools to the machine after the tool is changed. With the Electronic Sensitive Setting system developed for this calibration, you will be able to make a fast and high-precision adjustment to your machine, moreover, in a few seconds …

The products we produce have passed all safety tests in terms of compliance with international standards and are manufactured according to these standards. Our company is the only company with the service qualification certificate issued by the Turkish Standards Institute. Although the electrical and electronic equipment on the products have all the necessary certificates, all parts used are made of recyclable materials.

So that you can use it safely …

Product Code: RK-TR-2050SX